Maintenance method of LED ceiling lamp
First of all, you need to remember that after you buy back the lamps, do not rush to install them. You should carefully read the markings of the lamps and read the installation and use copy, and then install and use the lamps according to the rules of the copy, otherwise there may be risks.
Second: Replace the aging lamp in time according to the light source parameters provided by the logo. If it is found that the two ends of the lamp are red, the lamp is black or has shadows, and the lamp does not turn on, the lamp should be replaced in time to prevent the occurrence of ballast. Unsatisfactory phenomena such as burnout of the device;
Third: Be careful not to change the structure of the lamps during clean maintenance, and do not arbitrarily change the parts of the lamps. After the clean maintenance is over, the lamps should be installed as they are, and do not miss or wrongly install the parts of the lamps;
Fourth: Try not to switch on and off repeatedly when using LED lamps, which will greatly shorten the service life of LED lamps.